29
5.2 How to Solve Basic Operating Problems
No Power
Difficult to pedal
Bike shuts off during ride
Display flickers or fades in
and out
9-volt battery missing
9-volt battery too low
Harness not connected
10 to 15 hour break-in
period not complete
Pedaling too slow
Not entering desired
workout duration
Wire harness connector
loose
Install 9-volt alkaline battery
Replace 9-volt alkaline battery
Disconnect and
reconnect harness
Ride the bike for 10
to 15 hours
Pedal at 45 RPM minimum
Check that desired workout
duration appears in display
window prior to pressing
ENTER
Carefully remove console and
disconnect then reconnect
the 16-pin connector
SYMPTOM PROBABLE CAUSE CORRECTIVE ACTION