Filter
Top Products
9
l
Maximum Program Time
The maximum program time option allows the maximum program time to be changed from
the default maximum time limit of 60 minutes to anywhere from 1 to 99 minutes. Altering the
maximum program time will affect all programs except the Fit Test. To change the Lifecycle
exercise bike’s maximum program time, proceed as follows:
1. Press and hold the 5 key on the numeric keypad.
2. Begin pedaling, then press START.
All LEDs and 7-segment displays will be illuminated when you enter Diagnostic State 1. The
maximum program time default settings are located in Diagnostic State 5. Each time you
press the ENTER key you will advance one diagnostic state. Continue to advance to
Diagnostic State 5.
3. When you reach Diagnostic State 5, the current MAXIMUM PROGRAM
TIME setting will be displayed. The factory set default maximum program
time is 60 minutes.
4. Use the 1 key to decrease the MAXIMUM PROGRAM TIME or the 3 key to
increase the MAXIMUM PROGRAM TIME.
5. To exit the Diagnostic States, press the CLEAR / PAUSE key repeatedly until
you return to the user display. The user display is the initial display console
you see when you approach the unit for normal operation.
l
English / Metric toggle
Follow steps 1, 2 and 3 as listed above to reach Diagnostic State 5 and continue with Step
4 as listed below.
4. Press the ENTER key two more times to reach Diagnostic State 7. This state
indicates the display console default setting of English or Metric units.
When the default is set to English units of measurement, it will read ‘E’ in the
upper right window of the display console.
When the default is set to Metric units of measurement, it will read ‘9’ in the
upper right window of the display console.
5. To exit the Diagnostic States, press the CLEAR / PAUSE key repeatedly
until you return to the SELECT PROGRAM state (all program LED’s will
be flashing).
1.5 Optional Settings for the Lifecycle Exercise Bike