Filter
Top Products
46
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA
Stereo playback
This is the mode for playing in stereo. The tone can be adjusted.
• Sound is output from the front left and right speakers and subwoofer.
• If multichannel signals are input, they are mixed down to 2-channel
audio and are played.
1
Playing the source (vpage 26 –
42).
2
Press STEREO.
Stereo playback begins.
Direct playback
Sound recorded in source is played as is.
• Surround back signals or front height signals are not created.
• In this mode, the following items cannot be adjusted.
• Tone (vpage73) • MultEQ
®
XT (vpage74)
• Dynamic EQ
®
(vpage74) • Dynamic Volume
®
(vpage75)
• M-DAX (vpage76)
1
Playing the source (vpage 26 –
42).
2
Press P.DIRECT to select the
direct mode.
• If PURE DIRECT on the main unit is
pressed, the same function as with the
remote control unit can be obtained.
• Each time P.DIRECT is pressed, the
direct mode is switched.
Source Direct
This mode plays back tracks at high sound quality
without passing through the sound quality adjustment
circuits.
Pure Direct
z
This mode plays back tracks at the closest to the
original sound quality.
Auto
This mode detects the type of input digital signal,
and automatically selects the corresponding mode
for playback.
z The following circuits that affect sound quality are set to off.
• Main unit’s display circuit (The display is turned off.)
• Analog video input/output circuit
• To cancel, press P.DIRECT again.
• Video signals are only output when HDMI signals are played in the
PURE DIRECT mode.
NOTE
When in the PURE DIRECT mode, the menu screen is not displayed.
Dolby Virtual Speaker/Dolby
Headphone playback
n Dolby Virtual Speaker mode
This delivers a full surround sound experience from two stereo
speakers.
• Sound is output from the front left and right speakers.
• If multichannel signals are input, they are mixed down to 2-channnel
audio.
1
Playing the source (vpage 26 –
42).
2
Press SURR. to select “DOLBY
VS”.
n Dolby Headphone mode
You can enjoy listening to multi-channel surround sound through
headphones using this mode.
Press
SURR.
to select the Dolby
Headphone mode.
• If SURROUND MODE on the main unit is
pressed, the same function as with the
remote control unit can be obtained.
• Each time SURR. is pressed, the Dolby
Headphone mode is switched.
DOLBY
HEADPHONE
This is the surround mode for listening with
headphones.
The surround sound field is played through regular
headphones.
DOLBY HP
BYPASS
The sound is played in the normal stereo mode
rather than the surround mode when listening with
headphones.
DOLBY HP
PLg Movie
This mode is best suited for movie sources.
DOLBY HP
PLg Music
This mode is best suited for music sources.
NOTE
• The surround mode returns to the previous setting as soon as the
plug is removed from the jack.
• You can select Dolby HP PLg Movie or Dolby HP PLg Music when a
2-channel source is played back.
1.AV7005U_ENG.indd 46 2010/08/23 18:32:46