Filter
Top Products
94
ENGLISH DEUTSCH FRANÇAIS ITALIANO ESPAÑOL NEDERLANDS SVENSKA
Operating learn function
n Delete remote control codes for all input
sources
1
Press and hold down SET and
SOURCE SEL until the LEARN
indicator blinks.
2
Press and hold down HDMI and
press ON and STANDBY .
LEARN indicator lights.
3
Press ENTER to continue erasing.
“ERASE” is shown in the remote
control display, and the mode returns
to learning mode.
• To cancel the erasing operation, do not
press
ENTER and simply press any other
button.
• To return the normal mode, press SET.
NOTE
Erasing codes will return to the factory preset code, or there will leave
empty if the button has no factory preset code.
Delete saved remote control codes
Codes can be erased in three ways: by buttons, sources, and by all
memory contents.
n Delete remote control codes for each button
1
Press and hold down SET and
SOURCE SEL until the LEARN
indicator blinks.
2
Press input source select buttons
to select the input source you
want to delete.
The input source is shown in the remote
control display.
3
Press and hold down HDMI and
press the learned button to be
erased twice.
“ERASE” is shown in the remote control
display, and the mode returns to learning
mode.
• To return the normal mode, press
SET.
n Delete remote control codes for each input
source
1
Press and hold down SET and
SOURCE SEL until the LEARN
indicator blinks.
2
Press and hold down HDMI and
press the learned input source
select buttons to be erased twice.
“ERASE” is shown in the remote control
display.
3
Press ENTER to continue erasing.
The indicator blinks twice and the
mode returns to LEARN mode.
• To cancel the erasing operation, do not
press
ENTER, and simply press any other
button.
• To return the normal mode, press SET.
1.AV7005U_ENG.indd 94 2010/08/23 18:33:20