Filter
Top Products
General
Make various other settings.
Language
Set the language for display the menu on the TV screen.
English / Français / Español (Default : English)
“Language” can also be set up by the following operation. However, the menu screen
is not displayed. Watch the display while configuring the settings.
1. Press and hold the main unit’s ZONE2 SOURCE and STATUS for at least 3
seconds.
“V.Format:< NTSC>” appears on the display.
2. Press the main unit’s DIMMER.
“Lang.:<ENGLISH >” appears on the display.
3. Use the main unit’s ZONE2 SOURCE or INTERNET RADIO and set the language.
4. Press the main unit’s STATUS to complete the setting.
ECO
Configure the settings of the ECO Mode and auto standby mode.
o
ECO Mode
This can reduce the power consumption when the power of the unit is
on.
On: Reduce the power consumption.
Auto:
The power consumption is automatically
reduced to match the volume.
Off
(Default):
Do not reduce the power consumption.
0
When you want to output audio at a high volume level, it is recommended to
set “ECO Mode” to “Off”.
0
Eco mode can also be switched by pressing ECO G on the remote control
unit.
Contents Connections Playback Settings Tips Appendix
201
Front panel Display Rear panel Remote Index