13
Getting started Basic connections Troubleshooting Specifications IndexAdvanced connections Advanced operation Explanation terms
ENGLISH
Basic operation
Muting the sound
Sound can be muted temporarily.
Press ATT.
“ATT” appears on the display and the
sound is muted.
•To restore the sound, press the button
again.
n How to Set Attenuation Level
•Attenuation level can only be set using ATT on the unit.
•The attenuation level can be set at –20 dB, –40 dB, or –∞.
•The factory default setting is –20 dB.
1
Press and hold ATT on the unit for 2 seconds or
longer.
The attenuation level will appear on the display.
2
Press ATT on the unit.
•Each time the button is pressed, the attenuation level
changes as follows:
–20 –40
–00 (– )
•If not operated for 2 seconds, the current setting is saved
and the display returns to normal.
Using headphone set
Plug headphones into PHONES jack.
•When using headphones, turn off the speaker output using
SPEAKERS A/SPEAKERS B.
•To prevent hearing loss, do not raise the volume level
excessively when using headphones.
Starting playback
Switching the illumination lamp
setting
The illumination lamps on the both sides of the unit main panel
can be turned on or off.
Press and hold DISPLAY on the unit for 2 seconds or
longer.
The on/off setting changes as follows with each press of the
button.
On
(Factory default)
Off
1.PM-11S3U_ENG_0521.indd 13 2012/05/21 19:03:33