Filter
Top Products
4. TV Menus 55
For assistance call 1(800) 332-2119
Inputs
Inputs Name
INPUT and HDMI jacks:
Cable box, Cam(corder), CD,
DVD (DVD, DVD2, Blu-ray), DVR,
Game (Game, PS, Xbox, Wii),
Media Box, PC, Satellite, AVR
On/Off (ANT,
Bluetooth
only)
INPUT
jacks
only:
CD/Audio, MP3 Player, VCR
HDMI
jacks
only:
PC, AVR, Delete
Lets you assign or • change names of inputs appearing in the Input Selec-
tion menu. Highlight an input and press
ENTER
multiple times to cycle
through the name choices.
Lets you turn the • Ant and Bluetooth inputs On/Off to display or hide them
in the Input Selection menu; highlight the input and press
ENTER
to switch
between On and Off. A paired device is cleared from memory when the
Bluetooth icon is turned off.
Lets you delete unused HDMI inputs from the • Input Selection menu.
A CEC-enabled tuner can be named either • Cable Box or Satellite.
A CEC-enabled DVD player can be named • DVD, DVD2, or Blu-ray.
General Notes for the Inputs > Name Menu
When you change an input name and then exit the
Name menu:
The name is changed•
The icon in the • Input Selection menu is changed
Audio and video settings are changed to the •
defaults for the new device type.
265 Series:• All previous NetCommand IR “learn-
ing” for the input is erased.
Notes for HDMI devices
Disconnecting an HDMI device:• When you discon-
nect an HDMI device, the icon remains in the Input
Selection menu until you remove it. Select Delete in
the Inputs > Name menu to remove an unwanted icon
for an HDMI input.
If the • New Device Found screen does not display
as expected when you connect an HDMI device,
see “Reactivating Auto Input Sensing for an HDMI
Input,” page 15.
HDMI Control and CEC-Enabled Devices:• See
Appendix C, “HDMI Control of CEC Devices,” page
81.
If case of CEC conflicts:• Turn off CEC signals in
one of these ways:
Turn off the TV’s HDMI Control signals to the -
device (Inputs > HDMI Control menu).
Turn off each device’s internal CEC capability. -
See Appendix C for the TV’s HDMI Control or, to
turn on/off a specific device’s response to CEC
signals, see the device owner’s manual.
Inputs Learn
265
Series.
Sets up or changes NetCommand IR control of the current device.
See “About NetCommand IR Control,” page 60.
Inputs AVR
265
Series.
Sets up or changes NetCommand IR control of an A/V receiver.
See “NetCommand IR Control of an A/V Receiver” on page 67.
Inputs
HDMI
Control
On, Off
Select On or Off to enable or disable the TV’s control of a CEC-enabled
device. See Appendix C for use of this feature.
Downloaded From TV-Manual.com Manuals