Filter
Top Products
Appendices 83
For assistance call 1(800) 332-2119
Using HDMI Control
As an example of using HDMI Control, press
PLAY
on
the device itself to:
Power on the TV•
Switch to the device (no need to display the •
Input Selection menu)
Begin play of the device•
Direct Keys
Test your equipment with the TV’s remote control to
find additional supported commands. See the table
below for commands that may be available, depending
on the individual device.
CEC-enabled VCR, DVD, and DVR functions that
may be available:
Record/
Playback
Menu
Navigation
Channel
Tuning
Other
CH GUIDE
ENTER
Digits
0–9
,
CANCEL
TOOLS
Check the
TOOLS menu
for supported
functions.
CANCEL
(to cancel)
ENTER
If you have a CEC-enabled A/V receiver, CEC-enabled
devices connected to the A/V receiver with an HDMI
cable may also be controllable. They can be selected
from the TV’s Input Selection menu.
CEC-enabled A/V receiver functions that may be
available:
Try the •
VOL
,
MUTE
, and menu-navigation keys.
To open the A/V receiver menu, follow these steps:•
While watching TV, press 1.
AUDIO
.
Press 2. until the TV Speakers option displays.
Press 3. to select Off (to send audio to the A/V
receiver).
Press 4.
INPUT
and highlight the A/V receiver icon
in the Input Selection menu.
Press 5.
TOOLS
.
Select 6. Menu from the Tools menu.
Resolving CEC Conflicts
Because each manufacturer selects which CEC func-
tions to support, some devices can conflict with other
devices. If control conflicts arise, you can:
Turn off TV control of an individual CEC-enabled •
device (see below).
Turn off CEC in the setup menu of one of the •
devices.
Turning Off the TV’s HDMI Control of a CEC Device
Press
1.
MENU
on the TV remote control.
Highlight
2.
Inputs > HDMI Control.
Move to the device name and press
3.
ENTER
to select
Off to turn off the TV’s ability to control the device.
Press
4.
EXIT
to clear the menu.
Inputs > HDMI Control menu
Removing an HDMI Device
Power off the device.
1.
Disconnect the HDMI cable.
2.
Press
3.
MENU
on the TV remote control to enter the
TV main menu.
Go to
4.
Inputs > Name.
Highlight the HDMI input name and press
5.
ENTER
to
select Delete.
Press
6.
EXIT
to clear the menus.
Inputs > Name menu with Delete selected for HDMI-3.
Appendix C: HDMI Control of CEC Devices, continued
Downloaded From TV-Manual.com Manuals