Mitsubishi Electronics MDT65IS Car Video System User Manual


 
English-21
English
BNC-RCA adaptor
HDMI cable
DVD/HD IN
(Y·Pb·Pr, Y·Cb·Cr)
DVD/HD IN
(Y·Pb·Pr, Y·Cb·Cr)
AUDIO IN2 (RCA)
RGB1 IN (HDMI)
To D connector output
To video output
To HDMI output
Audio output Audio cable (RCA)
Signal cable
(BNC x 3 to D connector)
BNC cable
(BNC x 3 to BNC x 3)
Connecting a video device (component video/HDMI device)
This monitor can be connected to a video device equipped with component output such as a DVD player.
Refer to the user’s manual of the connected device for details. (Cables shown in the fi gure below are commercially available.)
To connect a DVD player equipped with component output to the DVD/HD IN connector (YPbPr or YCbCr) on the monitor, use a
BNC cable (BNC x 3 – BNC x 3) and a BNC-RCA adaptor (commercially available), or a signal cable (BNC x 3 – D connector).
Select [DVD/HD] using the INPUT button on the monitor or the YPbPr button on the wireless remote control.
To make audio connection, connect an audio cable (RCA) to the AUDIO IN2 connector or the AUDIO IN3 connector.
Select [AUDIO2] or [AUDIO3] using the AUDIO INPUT buttons on the wireless remote control.
To connect a DVD player equipped with HDMI output to the RGB1 IN connector (HDMI) on the monitor, use an HDMI signal
cable.
Select [RGB1] using the INPUT button on the monitor or the HDMI button on the wireless remote control.
For HDMI cable connection, select HDMI audio.
(You can select HDMI audio only when the video input is [RGB1].)
DVD player
(component device)
LCD monitor (rear)
DVD player
(HDMI device)
P-4 Connection procedure (continued)
Downloaded From TV-Manual.com Manuals