Filter
Top Products
28
Chapter 3 Setting Monitor
3-8. Enable/Disable Auto Sharpness [Auto Sharpness]
By enabling Auto Sharpness outlines will be adjusted according to the displayed image which can
improve its feel and texture.
Procedure
Choose <Tools> from the Adjustment menu, and press .
Choose <Auto Sharpness> from the <Tools> menu, and press .
Select “On” or “Off” with or .
Press to exit the adjustment.
NOTE
The extent of adjustment depends on the set up value of [Outline Enhancer].•
3-9. Restoring the Default Setting
There are two types of Reset. One is to reset the color adjustment only to the default settings, and the
other is to reset all the settings to the default settings.
Attention
After resetting, you cannot undo the operation.•
NOTE
For main default settings, refer to “Main default settings (factory settings)” on page 41.•
●
To reset color adjustment values [Color Reset]
Only the adjustment values in the current mode will revert to the default settings (factory settings).
Procedure
Choose <Color> from the Adjustment menu, and press .
Choose <Color Reset> from the <Color> menu and press .
Select “Execute” with or .
Press to exit the adjustment.
The color adjustment values revert to the default settings.
●
To reset all adjustments to the factory default settings [All Reset]
Reset all adjustments to the factory default settings.
Procedure
Choose <Tools> from the Adjustment menu, and press .
Choose <All Reset> from the <Tools> menu, and press .
Select “Execute” with or .
Press to exit the adjustment.
All setting values revert to the default settings.
1.
2.
3.
4.
1.
2.
3.
4.
1.
2.
3.
4.