Filter
Top Products
40
Chapter 6 Reference
Environmental
Conditions
Temperature Operating temperature: 0 °C - 35 °C (32 °F - 95 °F)
Storage temperature: -20 °C - 60 °C (-4 °F - 140 °F)
Humidity Operating humidity: 20% - 80% R.H. (no condensation)
Storage humidity: 10% - 80% R.H. (no condensation)
Pressure Operating: 700 to 1,060 hPa
Storage: 200 to 1,060 hPa
USB Standard USB Specication Revision 2.0
Port Upstream port × 1, Downstream port × 2
Communication Speed 480 Mbps (high), 12 Mbps (full), 1.5 Mbps (low)
Supply current Downstream: Max. 500mA/1 port
SX2462W
LCD Panel Size 24.1-inch (610 mm) TFT color LCD
Surface treatment Hard Coating
Surface hardness 3H
Viewing angle Viewing angle : Horizontal 178°, Vertical 178° (CR:10 or more)
Dot Pitch 0.270 mm
Response Time Approx. 13ms
Horizontal Scan
Frequency
Analog 31-76 kHz
Digital 31-76 kHz
Vertical Scan
Frequency
Analog 49-86 Hz (Non-interlace)
Digital 59-61 Hz (Non-interlace) (VGA TEXT: 69-71 Hz)
Resolution 1920 dots × 1200 lines
Max. Dot Clock Analog 170 MHz
Digital 164.5 MHz
Max. Display Color Approx. 1073.74 million colors (DisplayPort 10bit)
Display Area (H × V) 518.4 mm × 324.0 mm
Power Supply 100-120 VAC ±10%, 50/60Hz 1.0A
200-240 VAC ±10%, 50/60Hz 0.5A
Power
Consumption
Screen Display On 95W or less (with USB load)
85W or less (without USB load)
Power saving mode 0.9W or less (for DVI-I (Analog) single signal input, without USB load,
[Input Selection] : “Manual”)
Power button Off 0.7W or less (without USB load)
Main Power switch Off 0W
Input Signal Connector DVI-I connector (Applicable to HDCP) × 2
DisplayPort (Standard V1.1a, applicable to HDCP)
Analog Input Signal (Sync) Separate, TTL, positive/ negative
Composite, TTL, positive/ negative
Analog Input Signal (Video) Analog, Positive (0.7Vp-p/75Ω)
Digital Signal (DVI) Transmission System TMDS (Single Link)
Analog Input Signal
Video Signal Memory (Max.)
45 (preset: 9)
Plug & Play Analog / Digital (DVI-I) : VESA DDC 2B / EDID structure 1.3
Digital (DisplayPort) : VESA DisplayPort / EDID structure 1.4