Filter
Top Products
15
Connecting -compatible Components
With (Remote Interactive) you can control your -
compatible Onkyo cassette tape deck or MD recorder with
the CR-505DAB’s remote controller, and use the following
special functions:
■
Auto Power On
When you turn on a component connected via while the
CR-505DAB is in Standby, the CR-505DAB automatically
turns on and selects that component as the input source.
This function doesn’t work if the CR-505DAB is already
on.
■
Direct Change
When you press the play button on a component connected
via , the CR-505DAB automatically selects that compo-
nent as the input source.
■
Auto Power Off
When you set the CR-505DAB to Standby, all components
connected via also enter Standby.
■
Controlling Other Components
Other components can be controlled with the supplied
remote controller (see “Remote Controller” on page 10).
■
CD Synchro Recording
An MD recorder or cassette tape deck connected via ,
and set to record pause, will start recording automatically
when CD playback is started on the CR-505DAB.
■
Timer
The CR-505DAB’s timers can be used to automatically start
playback or recording on a cassette tape deck or MD
recorder connected via (see “Timers” on page 32).
■
Sleep Timer
When you set the CR-505DAB’s sleep timer, the sleep tim-
ers on component connected via are also set, so all
components switch off after the specified period.
To use , you need to connect the CR-505DAB’s
connector to an connector on the other component by
using an cable. An cable is supplied with each -
compatible Onkyo cassette tape deck and MD recorder.
Hookup Example:
Notes:
• Use only cables for connections.
• To use
you must make an analog RCA/phono con-
nection between the CR-505DAB and the other com-
ponent even if they are connected digitally.
• If a component has two connectors, you can connect
either one to the CR-505DAB. The other connector is for
connecting additional -compatible components.
• Connect the CR-505DAB’s connector only to Onkyo
components. Connecting to other manufacturer’s compo-
nents may cause them to malfunction.
• Some Onkyo -compatible components may not sup-
port the special functions described above.
OUT OUT
SPEAKERS
RL
PRE OUT
OPTICAL
DIGITAL
OUT
SUB
WOOFER
IN IN IN
REMOTE
CONTROL
TAPE LINEMD
R
L
R
L
FM75DAB
ANTENNA
AM
L
R
(
REC
)(
PLAY
)
INPUT OUTPUT
REMOTE
CONTROL
OPTICAL
12
DIGITAL INPUT
L
R
ANALOG
L
R
L
R
L
R
L
R
(REC) (PLAY)
INPUT
MD
IN
OUTPUT
OUT
REMOTE
CONTROL
REMOTE
CONTROL
OPTICAL
1
DIGITAL INPUT
OPTICAL
DIGITAL
OUT
cable
Onkyo MD recorder
CR-505DAB
To other
-compatible
component