Onkyo TX-SR602E Car Stereo System User Manual


 
61
Basic Operation
—Continued
The following table lists all the listening modes and shows which modes can be selected for each input signal format.
Input signal format
Analog,
PCM*1
1. In the Pure Audio and Direct listening modes, PCM signals at 32 kHz, 44.1 kHz, and 48 kHz are processed at 64 kHz, 88.2 kHz, and 96 kHz respec-
tively. 96 kHz signals are processed at 48 kHz for all listening modes other than Pure Audio, Direct, and Stereo.
Dolby D
DTS/DTS 96/24*2
2. In the Pure Audio, Direct, Stereo, and DTS 96/24 listening modes, signals are processed as DTS 96/24. Everything else processed as DTS.
Multich
*/2 2/0 1/0,1+1 Other */2 2/0
1/0,
1+1
Other
DTS-
ES
Source
CD, TV, LD,
VHS, MD,
turntable,
radio,
cassette,
DTV, etc.
DVD, DTV, etc. DVD, LD, CD, etc. DVD
Listening mode
Pure Audio
❍❍❍❍
❍❍❍ ❍
Direct
Stereo
❍❍
❍❍
❍❍❍
*3
3. TX-SR702E only.
Mono
*3
PLIIx Movie/Music/Game *4
4. If the SurrBack parameter is set to “None,” or the Zone 2 speakers are being used, PLII is used.
❍❍
Neo:6 Cinema
Neo:6 Music *5
5. Available only when Surround speakers are connected.
❍❍
Dolby D
Dolby D EX *6
6. Cannot be selected if the SurrBack parameter is set to “None” or the Zone 2 speakers are being used.
Dolby D+PLIIx Movie *7
7. Cannot select if the SurrBack ch setting is not set to “2ch,” or the Zone 2 speakers are being used.
Dolby D+PLIIx Music *6
DTS, DTS 96/24
*8
8. If the SurrBack setting is set to “None,” or the Zone 2 speakers are being used, DTS is used.
DTS+Neo:6 *6
DTS+Dolby EX *6
DTS+PLIIx Movie *7, Music *6
DTS-ES Discrete *6
Discrete
DTS-ES Matrix *6
Matrix
Multich
Multich+Dolby EX *6
*3
Multich+PLIIx Movie *7, Music *6
*3
*9 PLIIx+THX Cinema *4
9. TX-SR702/702E only.
❍❍
*9 Neo:6+THX Cinema
*9 THX Cinema
❍❍❍❍
*8
*3
*9 THX SurrEX *6
*3
*9 PLIIx+THX Cinema *7
❍❍
*3
*9 DTS+Neo:6+THX Cinema *6
*9 DTS-ES+THX Cinema *6
Mono Movie
*3
Enhance
Orchestra
Unplugged
Studio-Mix
TV Logic
All Ch Stereo
❍❍❍❍❍❍❍❍
*3
Full Mono
*3
Theater-Dimensional
❍❍❍❍❍❍❍❍
*3