Filter
Top Products
44
Main Menu (continued)
45
INPUT SELECT
Underlined values indicate factory defaults.
Submenu Setting Description
VIDEO
AUTO
NTSC
PAL
Used to select the format for VIDEO input.
*
1
[AUTO] Automatically selects NTSC or PAL.
[NTSC] NTSC
[PAL] PAL
NTSC SETUP
00
75
Selects NTSC setup level.
[00] Select this when there is no setup signal.
[75] Select this when using 7.5 % setup signals.
(The monitor internally adjusts the 7.5 % setup level to suit the black level)
DVI-I
DIGITAL
ANALOG
Selects DVI-I input mode.
[DIGITAL] Selects digital input.
[ANALOG] Selects analog input.
DIGITAL
AUTO
VIDEO
COMP.
Selects the DVI-I digital input mode.
[AUTO] Selects the input mode automatically depending on the input format.
[VIDEO] Selects component input.
[COMP.] Selects PC input.
ANALOG
YP
B
P
R
RGB-COMP.
Selects YP
B
P
R
(component) or RGB input mode when DVI-I is set to "ANALOG."
[YP
B
P
R
] Selects the YP
B
P
R
signal.
[RGB-COMP.] Selects the PC RGB signal.
COMPONENT
LEVEL
SMPTE
B75
B00
Selects the YP
B
P
R
(component) signal input level of DVI-I analog inputs.
[SMPTE] Signal level complies with SMPTE, and P
B
, P
R
are 0.7 V [p-p] at 100%
chroma.
[B75] Select this when connecting a Betacam or similar device with a setup function.
(The monitor internally adjusts the 7.5 % setup level to suit the black level)
[B00] Select this when connecting a Betacam or similar device without a setup
function.
RGB-COMP. ▼ Performs analog PC settings. (→ Below "RGB-COMP.")
*
1
[AUTO] is the factory default, but select an appropriate format when there is risk that the input signal may be contaminated by
outside noise.
RGB-COMP.
Selecting [ANALOG.] under [DVI-I] in the [INPUT SELECT] menu and selecting [RGB-COMP.] under [ANALOG] opens the following
menu.
Underlined values indicate factory defaults.
Submenu Setting Description
H POSITION
0 to 60
(Factory default setting:
30)
Adjusts horizontal image display position in 2-clock units.
*
2
V POSITION 0 to 15
(Factory default setting:
8)
Adjusts vertical image display position.
*
2
PHASE 0 to 31
(Factory default setting:
16)
Adjusts the clock phase in 1/32 clock period increments.
*
2
CLOCK 700 to 2200
(Factory default
setting
*
3
)
Adjusts the sampling clock in 2-clock units.
*
2
*
4
RESET Returns [H POSITION], [V-POSITION], [PHASE] and [CLOCK] settings in the
RGB-COMP. input compliant format to their factory defaults.
*
2
Each compatible input format can be adjusted, but not when user data is loaded (→page 30 "SETUP LOAD") or saved (→page 30
"SETUP SAVE") .
*
3
[CLOCK] factory default values
Format CLOCK Format CLOCK
640×480 (60 Hz) 800 1280×768 (60 Hz) 1664
800×600 (60 Hz) 1056 1280×1024 (60 Hz) 1688
1024×768 (60 Hz) 1344
*
4
This menu is disabled when the input signal format is 1920 x 1080 (60 Hz).