Open as PDF
You can optimize the performance of CS Auto (Circle
Surround Automotive) by following the steps below.
Set the CS Auto mode to on.
Hold down [CS] (Circle Surround) for 2
sec. or more to display the audio menu
(SET) to adjust.
Press [DISP] to confirm the adjustment.
CS Auto allows your car interior to change to a splendid
audio room in a moment. Every speaker can be fine-
You can toggle the CS Auto function on and off every
time you press [CS] (Circle Surround). Select CS Auto
on or off after setting each item.
Note: If you enable CS Auto, the following functions are
SQ, POSITION, BASS/TREBLE, BALANCE/FADER, SUB-
WOOFER LEVEL, LPF, HPF, SBC-SW
Lights when CS Auto is activated.
CS AUTO MODE
Three-dimensional natural sound field is reproduced with
clarity in response to sound.
(default in other than the AM mode)
: Monaural (default in the AM mode)
SBC-SW: Super Bass Control-Subwoofer
The rear speaker can be used as a substitutional
subwoofer when a subwoofer is not connected.
Holding down  (SBC-SW) for 2 sec. or more
toggles SBC-SW on and off.
CS AUTOMOTIVE MENU display
You can toggle the SQ function on and off every
time you press [CS] (SQ).
¡Each SQ level is changeable. (a page 20)
¡If you enable SQ, the following functions are
CS Auto, F-TruBass, R-TruBass, S.W.-TruBass,
F-Focus, R-Focus, F-R MIX
Lights when SQ is activated.
(Hidden in the FLAT mode)
SQ (Sound Quality)
You have six preset modes (FLAT, POP, ROCK, VOCAL,
SQ9 (9-Band Sound Quality)
Center frequency and level are adjustable in each of nine
bands. This lets you fine tune sound quality for each
genre to suit car-interior acoustics and your personal
¡If ON is selected, the settings of subwoofer level
adjustment and subwoofer low pass filter are activat-
ed. (a page 36)
¡When SBC-SW is set to ON, the CS mode automatical-
ly turns off.
Lights when SBC-SW is activated.