Filter
Top Products
CQ-C9901U/C9801U/C9701U
31
English
30
XM Tuner
(XM Direct
TM
receiver)
An optional XM Direct
TM
receiver allows you to receive the XM radio service.
Note: A changer and an XM Direct
TM
receiver are not connectable at the same time.
CQ-C9901U/C9801U/C9701U
1
Press [SRC] (Source) to select the XM
tuner.
2
Press [BAND] to select a band.
Preparation:
¡Connect the optional XM Direct
TM
receiver
(XMD1000).
¡To connect the XM Direct
TM
receiver
(XMD1000), it is required to use an optional
extension cord
(XMDPAN100) that is produced
by XM exclusively for Panasonic products.
Notes:
¡“RADIO ID” is displayed with channel 0.
¡“UPDATING” is displayed during the update of the
identification code.
¡“LOADING” is displayed during the acquisition of
audio data or information.
3
Select a station.
Channel selection
[]] (TUNE): Preceding channel
[[] (TUNE): Next channel
Preset station selection
[{] (P·SET: Preset): Lower preset channel
[}] (P·SET: Preset): Higher preset channel
Note: Direct Access can be executed with [1] to [6]
buttons on remote control.
1
Press [MENU] to
display the menu
display.
For using the remote
control, hold down
[MENU] for 2 sec. or
more.
2
Press [}] or [{] to select a mode to be
adjusted.
3
Press [BAND]
(SET) to adjust.
4
Press [MENU] to confirm the adjust-
ment.
For using the remote control, hold down [MENU]
for 2 sec. or more.
TEXT
Text display
: Enabled (default)
: Disabled
TEXT Setting (XM Tuner Menu Display)
(TEXT)
Operation Flow
SRC
CS
SRC
You can toggle the category on and off every time you
hold down [BAND] for 2 sec. or more. If the category is
set to on, the unit operates as follows for each button:
Channel selection
[]] (TUNE): Preceding channel in current category
[[] (TUNE): Next channel in current category
Category selection
[{] (P·SET: Preset): Preceding category
[}] (P·SET: Preset): Next category
Selection by Category
(P·SET: Preset)
SRC
CS
Band
Channel number/namePreset Number
Artist name/Song title Indicates the intensity of
the radio wave.
Indicates the satellite tuner
is ready.
Channel Preset
(P·SET: Preset)
Up to 6 channels can be preset in XM1 to XM3.
Preset channels can be simply called up by pressing
[}] (P·SET) or [{] (P·SET).
Note: Direct Access can be executed with [1] to [6]
buttons on remote control.
1
Tune in to a channel.
2
Hold down [}] or [{] for 2 sec. or
more.
3
Select a preset number by pressing [}]
or [{].
4
Preset the channel by holding down [}]
or [{] for 2 sec. or more.
channnel name/preset number blinks once.
Notes:
¡New channels overwrite existing saved stations.
¡In step 2, a channel can be registered by holding
down the numeric button [1] to [6] on the remote
control unit for 2 sec. or more.
¡To stop presetting, press [DISP] (Display).
Direct Access
A channel can be directly selected.
Example: channel number 5
1
Press [#] (NUMBER).
2
Press [5].
3
Press [SET].
Note: To suspend direct selection, press [DISP]
(Display).
Functions only by
remote control unit
Lights when category is activated.
XM Tuner (XM Direct
TM
receiver)
XM mode display