Filter
Top Products
31
Installation Guide (continued)
Securing of the main unit
Caution
¡ We strongly recommend that you wear gloves for installation work to protect yourself from injuries.
¡ When bending the mounting tab of the mounting collar with a screwdriver, be careful not to injure
your hands and fingers.
First complete the electrical connections, and then check them for correctness. (a page 33)
The included Mounting Collar q is designed specially for this unit. Do not use it to attach any other
model.
1
2
3
Insert Mounting Collar q into the dash-
board, and bend the mounting tabs out with
a screwdriver.
Establish the rear connection of the unit.
After fixing Power Connector, fix the rear of the
unit to the vehicle body by either method (a) or
(b) shown in the previous page.
After installation reconnect the negative (–)
battery terminal.
The tabs to be bent vary depending
on the vehicle. To securely install the
unit, fully bend a number of the tabs
so that there is no rattling.
Example:
Tab
q Mounting
Collar
Power Connector
Mounting Holes
Mounting Bolt
Mounting springs
Engage the Mount-
ing Springs in the
mounting holes of
the Mounting Collar
q firmly.
Mounting
Hole
Mounting Spring