Filter
Top Products
34
Caution
Please follow the instructions given below. Failure to do so will cause damage to the unit and speakers.
Speaker Connections
Connection with optional SiriusXM Connect Vehicle Tuner
L
R
-
-
-
-
-
-
-
-
-
-
+
+
+
+
+
+
+
+
+
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
-
+
L
R
L
R
L
R
<Right>
<Wrong>
(White)
(White/Black)
Chassis
(Gray/Black)
(Gray)
Chassis
¡ Use ungrounded speaker only.
¡ The maximum speaker input should be 45 W or more. (If used with the
optional power amplifier, the speaker input should be higher than the maxi-
mum amplifier output.)
¡ The speaker impedance should be 4 – 8 Ω.
¡ This unit uses the BTCL circuit, so each speaker should be connected sepa-
rately using parallel vinyl insulated cords.
¡ The speaker cords and the power amplifier unit should be kept away (about
30 cm apart) from the antenna and antenna extension cord.
¡ Never connect the speaker
cord to the body of the car.
¡ Do not use a 3-wire type
speaker system having a com-
mon earth lead.
¡ Do not connect more than one
speaker to one set of speaker
leads.
Electrical Connections (continued)
CONNECT
SiriusXM Connect Vehicle Tuner (Optional)
Satellite Radio Antenna
Main unit
Direction when connection
Note
:
Please notice the cable direction for
correct connection.
Note: Refer to installation guide included with the
SiriusXM Connect Vehicle Tuner for more information.