Filter
Top Products
10
Identifying Controls
B
1
Function select
●
[Volume] / [Backlight] / [Contrast] / [Brightness] /
[Colour] / [Sharpness] / [Tint] (NTSC signal) /
[Bass]
/ [Treble]
/ [Balance] / [Auto Tuning]
[Music] or [Speech] mode in the Sound Menu
(p. 27)
2
Channel Up / Down, Value change (when using the
F button), Switching the TV On (press either button
for about 1 second when in Standby mode)
3
Changes the input mode
4
Mains power On / Off switch
●
Use to switch the mains power.
If you turned the TV off during Standby mode by
the remote control last time, the TV will power on
in Standby mode when you turn the TV on with
Mains power On / Off switch.
When pressing the control panel button (1 - 4), the
control panel guide appears on the right side of
the screen for 3-7 seconds to highlight the pressed
button.
5
Remote control signal receiver
●
Do not place any objects between the TV remote
control signal receiver and remote control.
6
C.A.T.S. (Contrast Automatic Tracking System)
sensor
●
Senses brightness to adjust picture quality when
[Eco Mode] in the Picture Menu is set to [On].
(p. 26)
7
Power LED
●
Red : Standby
Green : On
●
The LED blinks when the TV receives a command
from the remote control.
Using the On Screen Displays - Operation guide
Many features available on this TV can be accessed via the On Screen Display menu.
■ Operation guide
Operation guide will help you to operate by using the
remote control.
Example: [Sound Menu]
Sound Menu
Mode
Music
Off
Off
Over 30cm
Bass
0
0
20
Treble
Balance
Headphone Volume
Surround
Auto Gain Control
Volume Correction
Speaker Distance to Wall
1/2
0
0
Select
EXIT
Page up
Change
RETURN
Page down
Operation guide
■ How to use remote control
MENU
Open the main menu
Move the cursor / select from a range of
options / select the menu item (up and down
only) / adjust levels (left and right only)
Access the menu / store settings after
adjustments have been made or options have
been set
RETURN
Return to the previous menu
EXIT
Exit the menu system and return to the normal
viewing screen
Auto power standby function
The TV will automatically go into Standby mode in the following conditions:
●
No signal is received and no operation is performed for 30 minutes in Analogue TV mode.
●
[Off Timer] is active in the Setup Menu. (p. 17)
●
No operation is performed for the period selected in [Auto Standby] (p. 30).
Indicator / Control panel
Ex
t
Pl
e
T
4
Rear side of the TV
3
1
4
2
567
TH-L32X50M_EN.indd 10TH-L32X50M_EN.indd 10 2/16/2012 5:21:28 PM2/16/2012 5:21:28 PM