Filter
Top Products
28
How to Use the Menu Functions
Menu Item Adjustments / Configurations (alternatives)
Sound
Equaliser
Adjust the frequency level to suit your favourite sound quality
●
This function is available when [Mode] is set to [User].
●
Select the frequency band with the left / right cursor button and change the
frequency level with the up / down cursor button.
●
If you want to enhance the bass sound, raise the level of the lower frequency.
If you want to enhance the treble sound, raise the level of the higher
frequency.
●
To reset the levels of each frequency to the default settings, select [Reset to
Defaults] using the left / right cursor button, and then press the OK button.
Balance Adjusts the volume level of the right and left speakers
Headphone Volume Adjusts the volume of the headphones
Surround
• Off
• V-Audio
Surround sound settings
[V-Audio]: Provides a dynamic enhancer of width to simulate improved spatial
effects
●
Switching is also possible by the Surround button on the remote control (p. 9).
Volume Control (VAO)
• TV
• Audio Out (TV Off)
• TV and Audio Out
Select to adjust the volume of the audio output
[TV]: Only the volume of TV speakers is adjustable.
[Audio Out (TV Off)]: Only the volume of Audio Out is adjustable and mute the
TV speaker’s volume.
[TV and Audio Out]: The volume of TV speakers and Audio Out is adjustable.
Auto Gain Control
• Off
• On
Adjusts the current volume level if it is extremely different from the previous
viewed channel or input mode
Volume Correction Adjust the volume of individual channel or input mode
Speaker Distance to
Wall
• Over 30cm
• Up to 30cm
Adjust the low frequency sound
●
If the space between the back of TV and wall is over 30 cm, [Over 30cm] is
recommended.
●
If the space between the back of TV and wall is within 30 cm, [Up to 30cm] is
recommended.
MPX
• Stereo
• Mono
• M1
• M2
Select multiplex sound mode (if available)
●
[Stereo]: Use this normally
●
[Mono]: When stereo signal cannot be received
●
[M1] / [M2]: Available while mono signal is transmitted
SPDIF Selection
• Auto
• PCM
SPDIF: A standard audio transfer file format
Selects the initial setting for digital audio output signal from HDMI2 terminal
[Auto]: Dolby Digital is output as Dolby Digital Bitstream. HE-AAC and MPEG
are output as PCM.
[PCM]: Digital output signal is fixed to PCM.
●
Video mode (p. 41) or Network video contents (p. 52)
●
Amplifier with ARC (Audio Return Channel) only
HDMI1 / 2 / 3 Input
• Digital
• Analogue
Select to fit the input signal (p. 63)
[Digital]: HDMI cable connection
[Analogue]: HDMI-DVI adaptor cable connection
●
HDMI input mode only
Reset to Defaults
Press the OK button to reset settings of the present [Mode], [Balance],
[Headphone Volume] and [Surround] in the Sound Menu to the default
M
St
TH-L32X50M_EN.indd 28TH-L32X50M_EN.indd 28 2/16/2012 5:21:40 PM2/16/2012 5:21:40 PM