Filter
Top Products
8
Accessories / Options
Assembly screw (4)
M5 × 16
Bracket
●
TBL5ZA32151
Base
●
TBL5ZX03601
Assembly screw (4)
M4 × 25
1
Assembling the pedestal
Use the assembly screws to fasten the bracket
to the base securely.
●
Make sure that the screws are securely tightened.
●
Forcing the assembly screws the wrong way will
strip the threads.
2
Securing the TV
Use the assembly screws to fasten securely.
●
Tighten the four assembly screws loosely at first,
then tighten them firmly to fix securely.
●
Carry out the work on a horizontal and level surface.
B
Arrow mark
Hole for pedestal
installation
D
A
C
Hold the bracket
not to fall over
Front
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.
1 Remove the assembly screws from the TV.
2 Pull out the pedestal from the TV.
3 Remove the assembly screw from the bracket.
Preventing the TV from falling over
Using the fall-prevent screw hole and a screw (commercially available), securely fix the body of the pedestal to the
installation surface.
●
The place where the pedestal is to be fixed should be thick enough and made of hard material.
Screw (not supplied)
Diametre: 3 mm
Length: 25 - 30 mm
Screw hole
I
d
R
4
1
3
5
1
0
2
4
6
7
8
9
1
1
1
2
1
3
TH-L32X50M_EN.indd 8TH-L32X50M_EN.indd 8 2/16/2012 5:21:27 PM2/16/2012 5:21:27 PM