Filter
Top Products
Pelco Manual C1506M (3/00)
[
3
]
DESCRIPTION
The IRD/ERD2000 Series Receiver operates Pelco’s fixed speed pan/tilts and domes.
The receiver works with standard and extended Coaxitron
®
controllers, including the CM6700/7500/8500/
9500, KBD9000, MPT9000/9008/9500, and MX4000. With Coaxitron control, pan/tilt and lens control sig-
nals are transmitted over the video coaxial cable. The control data is superimposed on the vertical blank-
ing interval of the video signal.
Standard features include pan/tilt control (including auto and random scan), camera power, lens control
(zoom, iris, and focus), and two auxiliary outputs. The receiver also can be used with the LRD41TLC Test
Local Control module, which allows on-site testing and troubleshooting of system functions. The TLC
module plugs into the receiver and operates off the receiver’s power.
Models
IRD2024 Indoor, fixed speed, Coaxitron receiver, 24 VAC input, 24 VAC output for camera
power and pan/tilt operation
ERD2200 Outdoor, fixed speed, Coaxitron receiver, 115/230 VAC input, 24 VAC output for cam-
era power, 24, 115, or 230 VAC output for pan/tilt operation, and 115 or 230 VAC out-
put for enclosure accessories
MOUNTING
Attach the IRD2024 to a flat surface.
Attach the ERD2200 to a vertical surface with the conduit entries facing down. Use the housing as a tem-
plate for drilling mounting holes.
Use 1/4-inch fasteners (not supplied) of the appropriate length. Refer to the illustrations below.
ANCHOR OR TOGGLE BOLT
(NOT SUPPLIED)
WALLBOARD
WOOD SCREW
(NOT SUPPLIED)
WALL
CONCRETE
WALL
ANCHOR
(NOT SUPPLIED)