Filter
Top Products
17EN
Set up for weak reception
When the current reception gets poor, the
product can automatically switch the source or
mute the speakers according to your setup.
1 Press and hold to access the system
menu.
» [DAB SCAN] is displayed.
2 Press / repeatedly until [DAB
WEAK] scrolls.
3 Rotate to select an option, and then
press
to conrm.
• [WEAK MUTE]: Mute the speakers
• [WEAK TO FM]: Switch the source
to an FM radio station with strong
reception that broadcasts the same
program
Use the DRC (Dynamic
Range Control)
DRC adds or removes a degree of
compensation for the differences in the dynamic
range between radio stations.
1 Press and hold to access the system menu.
» [DAB SCAN] is displayed.
2 Press / repeatedly until one of the
following options is displayed.
• [DRC OFF]: No compensation applied.
• [DRC LOW]: Medium compensation
applied.
• [DRC HIGH]: Maximum
compensation applied.
3 Rotate to select an option.
Disable the DAB reception
1
Press and hold to access the system
menu.
» [DAB SCAN] is displayed.
2 Press / repeatedly until
[ANTENNA OFF] or [ANTENNA 12V]
is displayed.
3 Rotate to select an option, and then
press
to conrm.
• [ANTENNA OFF]: Disable the DAB
reception.
• [ANTENNA 12V]: Enable the DAB
reception.
Reset the DAB tuner
1
Press and hold to access the system
menu.
» [DAB SCAN] is displayed.
2 Press / repeatedly until
[DAB RESET] is displayed.
• To clear the list of detected and
programmed stations, press
to
conrm.
• To exit the system menu, press
.
Remove invalid stations
1
Press and hold to access the system
menu.
» [DAB SCAN] is displayed.
2 Press / repeatedly until [PRUNE] is
displayed.
• To remove invalid stations from the list
of scanned stations, press
.
• To exit the system menu, press
.
Check the current version of
DAB rmware
1
Press and hold to access the system
menu.
» [DAB SCAN] is displayed.
2 Press / repeatedly until
[SW VERSION] is displayed, and then
press
.
» The current version of DAB rmware
is displayed.