Philips CE153DR Car Stereo System User Manual


 
25EN
Perform the upgrade
1 Check the current rmware version of this
product. (see 'Check the current version of
DAB rmware' on page 17)
2 Go to www.philips.com/support.
3 Log in with your account for Club Philips.
» Support information about your
registered product is displayed.
4 Click the link of "Firmware Upgrade
Readme File" (the exact wording of this
link name may vary in different languages).
5 Read and understand the instructions on
rmware upgrade.
6 Follow the instructions to download the
upgrade packet and complete the upgrade.
If the upgrade fails, reboot this system,
and then perform the upgrade again.
13 Product
information
Note
Specications are subject to change without prior
notice.
General
Power supply 12 V DC (11 V - 16
V), negative ground
Fuse 15 A
Suitable speaker
impedance
4 - 8
Maximum power
output
50 W x 4 channels
Continuous power
output
22 W x 4 RMS
(4
10% T.H.D.)
Pre-Amp output
voltage
2.0 V
Aux-in level 500 mV
Dimensions
(W X H X D)
182 X 52 X 95 mm
Weight (main unit) 1.0 kg
Radio
Frequency range
- FM
87.5 - 108.0 MHz
(100kHz per step in
auto search and 50kHz
per step in manual
search)
Usable sensitivity -
FM (S/N = 20 dBA)
8 µV
Frequency range -
AM(MW)
522 - 1620 KHz
(9 kHz)
530 - 1710 kHz
(10 kHz)
Usable sensitivity -
AM(MW) (S/N =
20 dBA)
30 µV
Frequency range -
DAB
174.928 - 239.200 MHz