Philips CE153DR Car Stereo System User Manual


 
27EN
Cannot switch the source to iPod/iPhone
Check whether the iPod/iPhone is securely
connected.
Check whether the iPod/iPhone is
compatible with this system.
Check whether the iPod/iPhone battery is
nearly empty. Connect it to this system for
charging rst.
Cannot switch the source to [DAB/DAB+]
Check whether the DAB radio receiver is
securely connected.
Check whether the DAB reception is
enabled (see ‘Disable the DAB reception’
on page 17).
Display shows ERR-12.
Data error. Check the USB storage device
or SD/SDHC card.
About the Bluetooth device
Music playback is unavailable on the system
even after successful Bluetooth connection.
The device cannot be used with the
system to play music.
The audio quality is poor after connection
with a Bluetooth-enabled device.
The Bluetooth reception is poor. Move
the device closer to the system or remove
any obstacle between the device and the
system.
Cannot connect with the system.
The device does not support the proles
required for the system.
The Bluetooth function of the device is
not enabled. Refer to the user manual of
the device to nd out how to enable the
function.
The system is not in the pairing mode.
The system is already connected with
another Bluetooth-enabled device.
Disconnect that device or all other
connected devices and then try again.
The paired mobile phone connects and
disconnects constantly.
The Bluetooth reception is poor. Move
the mobile phone closer to the system or
remove any obstacle between the mobile
phone and the system.
Some mobile phones may connect and
disconnect constantly when you make
or end calls. This does not indicate any
malfunction of the system.
For some mobile phones, the Bluetooth
connection may be deactivated
automatically as a power-saving feature.
This does not indicate any malfunction of
the system.