Filter
Top Products
4 End the call.
Refer to Introduction of Bluetooth telephone op-
erations on page 30.
Setting automatic answering
If this function is on, this unit automatically
answers all incoming calls.
% Turn automatic answering on or off.
(AVH-P5200DVD)
Refer to Introduction of Bluetooth telephone op-
erations on page 30.
(AVH-P5200BT)
Refer to Introduction of Bluetooth telephone op-
erations on page 25.
Adjusting the other party’s
listening volume
(Function of AVH-P5200BT)
To maintain the good sound quality, this unit
can adjust the other party’s listening volume.
If the volume is not loud enough for the other
party, use this function.
% Select Far end Volume.
Refer to Introduction of Bluetooth telephone op-
erations on page 25.
1—2—3
# This function can be performed even while
talking on the phone.
# Settings can be stored for each device.
Switching the ring tone
You can select whether or not to use this
unit’s ring tone. If this function is set to on,
the ring tone for this unit will sound.
1 Connect your cellular phone to this
unit.
2 Turn ring tone on or off.
(AVH-P5200DVD)
Refer to Introduction of Bluetooth telephone op-
erations on page 30.
(AVH-P5200BT)
Refer to Introduction of Bluetooth telephone op-
erations on page 25.
Using the preset dial lists
(Function of AVH-P5200BT)
You can easily store up to six phone numbers
as presets.
1 Display the preset screen.
Refer to Introduction of Bluetooth telephone op-
erations on page 25.
2 Touch one of preset dial keys to select
the desired phone number.
# If you want to delete a preset phone number,
touch and hold the preset dial key.
3 Make the call.
Refer to Introduction of Bluetooth telephone op-
erations on page 25.
4 End the call.
Refer to Introduction of Bluetooth telephone op-
erations on page 25.
Making a call by entering
phone number
(Function of AVH-P5200BT)
Wed 28 may
1
12:45 PM
ABCDEHGHI
012345678901
01
123
456
7
8
9
*
0
#
+
C
O
f
f
Important
Be sure to park your vehicle in a safe place and
apply the parking brake when performing this op-
eration.
En
49
Section
13
Detailed instructions
Detailed instructions