Filter
Top Products
CHNUMBER (channel number select setting)
CATEGORY (channel category select
setting)
Note
You can also perform the same operations using
CH MODE. To display CH MODE, touch A.MENU
and then touch FUNCTION.
Selecting the channel in the
channel category
1 Touch MODE to select the channel cate-
gory select setting.
Touch MODE repeatedly to switch between
the following channel select settings:
CHNUMBER (channel number select setting)
CATEGORY (channel category select
setting)
2 Touch a or b to select the desired chan-
nel category.
3 Touch c or d to select the desired chan-
nel in the selected channel category.
Selecting the XM channel
directly
You can select the XM channel directly by en-
tering the desired channel number.
1 Touch DIRECT.
CHANNEL INPUT appears in the display.
2 Touch 09 to input the desired channel
number.
# To cancel the input numbers,touch C.
3 While the input number is displayed,
touch ENTER.
The entered XM channel is selected.
Notes
! You can also perform the same operations
using CH INPUT. To display CH INPUT, touch
A.MENU and then touch FUNCTION.
! You can also perform this operation by press-
ing DIRECT on the remote control.
Display the ID code
Channel number select setting
If you select CH: 000, the ID code is displayed.
% Touch c or d to select CH: 000.
Channel category select setting
RADIO ID is provided as a channel category
for displaying the ID code.
% Touch a or b to select RADIO ID from
channel category.
# If you select another channel, display of the ID
code is canceled.
# Display of the ID code repeats displaying
RADIO ID and the ID code one after the other.
XM tuner
En
60
Section
11