Filter
Top Products
Turning the unit on
% Press SOURCE to turn the unit on.
When you select a source, the unit is turned
on.
Selecting a source
You can select a source you want to listen to.
To switch to the built-in CD player, load a disc
in the unit (refer to page 28).
% Press SOURCE to select a source.
Press SOURCE repeatedly to switch between
the following sources:
Tuner—Television—DVD player/Multi-
DVD player—Built-in CD player—Multi-
CD player—iPod—External unit 1—Exter-
nal unit 2—AUX1—AUX2—Telephone—
BTAudio
Notes
! In the followingcases, thesound source will
not change:
— When there is no unit corresponding to the
selected source connected tothis unit.
— When there is no disc in the unit.
— When there is no disc in the DVD player.
— When there is no magazine in the multi-
CD player.
— When there is no magazine in the multi-
DVD player.
— When the AUX (auxiliary input) isset to off
(refer to page95).
— When the BTAudio source is set to off
(refer to Activatingthe BTAudio source on
page 97).
! External unit refers to a Pioneer product (such
as one availablein the future) that, although
incompatible as a source, enables controlof
basic functions by this unit. Two externalunits
can be controlled by this unit. When two exter-
nal units are connected, the allocationof
them to external unit 1 or external unit 2 is
automatically set by this unit.
! When this unit’s blue/white lead is connected
to the vehicle’s auto-antenna relay control
terminal, the vehicle’s antennaextends when
this unit’s source is turned on. To retractthe
antenna, turn the source off.
Loading a disc
1 Press EJECT to open the front panel.
CD loading slot appears.
# After a CD has been inserted, press SOURCE
to select the built-in CD player.
2 Insert a CD into the CD loading slot.
Front panel is closed automatically, and play-
back will start.
! With jacket art functionon, jacketarts on
CD-ROM disc areautomatically readin this
unit when the disc is inserted. To cancel
reading jacket arts, press BAND. For de-
tails, refer to Reading jacket arts on page 38.
CD loading slot
# You can eject a CD by pressing EJECT.
Notes
! The built-in CD player plays one standard, 12-
cm or 8-cmCD at a time. Do not usean adap-
ter whenplaying 8-cm CDs.
! Do not insert anything other than a CD into
the CD loadingslot.
Basic Operations
En
17
English
Section
03