Filter
Top Products
! There is sometimes a delay between starting
up CD playbackand thesound being issued.
When being read, Formatread isdisplayed.
! If you cannot insert a disc completely or if
after you insert a disc thedisc does not play,
check that the label side of the discis up.
Press EJECTto eject the disc, and check the
disc for damagebefore insertingit again.
! When the CD loading or ejecting function
does not operate properly, you can eject the
CD by pressing and holding EJECT while
opening the front panel.
! If an errormessage such as ERROR-11 is dis-
played, refer to Understanding built-in CD
player error messages on page103.
Adjusting the volume
% Use MULTI-CONTROL to adjust the
sound level.
With the head unit, turn MULTI-CONTROL to
increase or decrease the volume.
With the remote control, press VOLUME to in-
crease or decrease the volume.
Turning the unit off
% Press SOURCE and hold until the unit
turns off.
Basic Operations
En
18
Section
03