Filter
Top Products
Introduction of audio
adjustments
1
1
1
Important
When phone is selectedas a source, no audio ad-
justments, except balance adjustment, are possi-
ble.
1 Audio display
Shows the audio adjustment status.
1 Press MULTI-CONTROL to display the
main menu.
FUNCTION, AUDIO and ENTERTAINMENT
appear on the display.
2 Use MULTI-CONTROL to select AUDIO.
Turn to change the menu option; press to se-
lect.
The audio function name appears on the dis-
play.
3 Turn MULTI-CONTROL to select the
audio function.
Turn MULTI-CONTROL clockwise or counter-
clockwise to switch between the audio func-
tions in the following order:
Fader (balance adjustment)—Position (posi-
tion selector)—TA Mode (time alignment set-
ting)—Time Alignment (time alignment
adjusting)—Loudness (loudness)—Powerful
(graphic equalizer adjustment)—FREQ. (16-
band graphic equalizer adjustment)—
Subwoofer1 (subwoofer on/off)—
Subwoofer2 (subwoofer cut-off frequency)—
Subwoofer3 (subwoofer slope)—Front HPF
(front high pass filter slope)—
Front HPF FREQ. (front high pass filter cut-off
frequency)—Rear HPF (rear high pass filter
slope)—Rear HPF FREQ. (rear high pass filter
cut-off frequency)—BBE (BBE)—COMP/BMX
(Compression and BMX)—Auto EQ (auto-
equalizer on/off)—ASL (automatic sound leve-
lizer)—SLA (source level adjustment)—
AUI sound level (auditory user interface)
# When selecting OFF in TA Mode, you cannot
switch to Time Alignment.
# You can select Subwoofer2 and
Subwoofer3 only when subwooferoutput is
turned on inSubwoofer1.
# When tuner, television or AUX is selectedas a
source, you cannot selectCOMP/BMX.
# When selecting the FMtuner as the source,
you cannot switch to SLA.
# To return to the display of eachsource, press
BAND.
Note
If you do not operate the audio functionwithin
about 30 seconds, the display is automatically re-
turned to thesource display.
Audio Adjustments
En
81
English
Section
14