Filter
Top Products
Playing a CD
2
2
2
2
4
4
4
3
3
3
3
1
1
1
1
You can use this unit to control a multi-CD
player, which is sold separately.
These are the basic steps necessary to play a
CD with your multi-CD player. More advanced
CD operation is explained starting on the next
page.
1 Disc number indicator
Shows the disc number currently playing.
2 Track number indicator
Shows the track number currently playing.
3 Play time indicator
Shows the elapsed playing time of the cur-
rent track.
4 Disc title indicator
Shows the title of the currently playing disc.
! If no title has been entered for the cur-
rently playing disc, nothing is displayed.
1 Press SOURCE to select the multi-CD
player.
Press SOURCE until you see Multi-CD dis-
played.
2 Push MULTI-CONTROL up or down to
select a disc you want to listen to.
# You can also selecta disc by using 1–6 but-
tons on theremote control.
! For discs 1 to 6, press the corresponding
button number.
! For discs 7 to 12, press and hold the corre-
sponding numbers, such as1 for disc 7,
until the disc number appears in the dis-
play.
3 To perform fast forward or reverse,
push and hold MULTI-CONTROL left or
right.
4 To skip back or forward to another
track, push MULTI-CONTROL left or right.
Pushing MULTI-CONTROL right skips to the
start of the next track. Pushing
MULTI-CONTROL left once skips to the start
of the current track. Pushing again will skip to
the previous track.
Notes
! When the multi-CD player performs the pre-
paratory operations,Ready is displayed.
! If an errormessage such as ERROR-11 is dis-
played, refer to the multi-CD player owner’s
manual.
! If there are nodiscs in the multi-CDplayer ma-
gazine, No Disc is displayed.
! When you select a CD TEXT disc on a CD TEXT
compatible multi-CD player, thedisc title auto-
matically begins to scrollin the display. Ever
Scroll function is ON at the initialsetting, the
disc title scrolls continuously. About Ever
Scroll, refer to Switching the Ever Scroll on
page 97.
Selecting a track directly
When using the remote control, you can select
a track directly by entering the desired track
number.
1 Press DIRECT.
Track number input display appears.
2 Press 0–9 buttons to enter the desired
track number.
# You can cancel theinput number by pressing
CLEAR.
Multi-CD Player
En
62
Section
10