Filter
Top Products
Black plate (12,1)
Note
You cannot create a custom illumination color
while SCAN is selected.
About MIXTRAX
MIXTRAX technology is used to insert a variety
of sound effects in between songs, allowing you
to experience your music as a nonstop mix com-
plete with visual effects.
Notes
! Depending on the file/song, sound effects
may not be available.
! Turn MIXTRAX off if the visual effects it pro-
duces have adverse effects on driving. Refer
to Operations using the MIXTRAX button on
page 6.
MIXTRAX menu
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select MIXTRAX.
3 Turn M.C. to select the MIXTRAX func-
tion.
Once selected, the following MIXTRAX functions
can be adjusted. The function is enabled when
MIXTRAX is on.
SHORT PLAYBCK(short playback mode)
You can select thelength of the playbacktime.
1 Press M.C. todisplay the setting mode.
2 Turn M.C.to select the desiredsetting.
1.0MIN (1.0minute)—1.5MIN (1.5minutes)—
2.0MIN (2.0minutes)—2.5MIN (2.5minutes)
—3.0MIN (3.0minutes)—OFF (off)
FLASH AREA (flasharea)
You can select areasfor flashing colors.
1 Press M.C. todisplay the setting mode.
2 Turn M.C.to select the desiredsetting.
KEY/DISPLAY (key anddisplay)—KEY (key)—
OFF (off)
! When OFF isselected, the color setunder IL-
LUMI is usedas the display color.
FLASH PATTERN (flash pattern)
The flashing colorand MIXTRAX special effects
display change withchanges in the soundand
bass levels.
1 Press M.C. todisplay the setting mode.
2 Turn M.C.to select the desiredsetting.
! SOUND LEVEL 1to SOUND LEVEL 6– The
flash pattern changesaccording to the
sound level. Selecta desired mode.
! LOW PASS 1to LOW PASS 6 –The flash
pattern changes accordingto the bass
level. Select adesired mode.
! RANDOM 1 –The flash pattern changes
randomly according tothe sound level
mode and lowpass mode.
! RANDOM 2 –The flash pattern changes
randomly according tothe sound level
mode.
! RANDOM 3 –The flash pattern changes
randomly according tothe low pass mode.
DISPLAY FX (displayeffect)
The MIXTRAX specialeffects display can beturned
on or off.
1 Press M.C. toselect the desired setting.
ON (MIXTRAX specialeffects display)—OFF
(normal display)
CUT IN FX(manual cut-in effect)
You can turn onor off the MIXTRAX soundeffects
while manually changingtracks.
1 Press M.C. toselect the desired setting.
ON (on)—OFF (off)
Initial menu
1 Press and hold SRC/OFF until the unit
turns off.
2 Press M.C. to display the main menu.
3 Turn M.C. to change the menu option
and press to select INITIAL.
Once selected, the initial menu function below
can be adjusted.
SP-P/O MODE (rearoutput and preout setting)
The rear speakerleads output and theRCA output
of this unit canbe used to connecta full-range
speaker or subwoofer. Select a suitable optionfor
your connection.
1 Press M.C. todisplay the setting mode.
2 Turn M.C.to select the desiredsetting.
! REAR/SUB.W – Selectwhen there is afull-
range speaker connectedto the rear speak-
er leads outputand there is asubwoofer
connected to theRCA output.
! SUB.W/SUB.W – Selectwhen there is a
subwoofer connected directlyto the rear
speaker leads outputwithout any auxiliary
amp and thereis a subwoofer connected
to the RCAoutput.
! REAR/REAR – Selectwhen there is afull-
range speaker connectedto the rear speak-
er leads outputand the RCA output.
If there is afull-range speaker connected to
the rear speakerleads output and theRCA
output is notused, you may selecteither
REAR/SUB.Wor REAR/REAR.
System menu
1 Press and hold SRC/OFF until the unit
turns off.
2 Press M.C. to display the main menu.
3 Turn M.C. to change the menu option
and press to select SYSTEM.
4 Turn M.C. to select the system menu
function.
For details, refer to System menuon page 11.
Using an AUX source
1 Insert the stereo mini plug into the AUX
input jack.
2 Press SRC/OFF to select AUX as the
source.
Note
AUX cannot be selected unless the auxiliary set-
ting is turned on. For more details, refer to AUX
(auxiliary input) on page 11.
Switching the display
Selecting the desiredtext information
1 Press DISP tocycle between the following:
! Source name
! Source name andclock
If an unwanted display appears
Turn off the unwanted display using the proce-
dures listed below.
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select SYSTEM.
3 Turn M.C. to display DEMO OFF and press
to select.
4 Turn M.C. to switch to YES.
5 Press M.C. to select.
Using this unit
12
Section
Using this unit
En
02
<QRD3199-A>12