Filter
Top Products
Audio source control
When you press the Home button twice, the
audio source control keys will be displayed on-
screen. Using these keys, you can operate the
audio source currently playing in the back-
ground without leaving the screen currently
displayed.
p The audio source control keys cannot be
displayed on the iPod audio source screen.
Each tap of the key selects whether to
mix or mute radio output with the
iPhone audio output. When radio audio
is mixed,
is displayed, and when un-
mixed,
is displayed.
p This setting is only available when
this product is switched to
Advanced App Mode .
p If you making a hands-free call or
switching to a radio source, radio
output is muted.
Each tap of the key switches between
muted and unmuted audio source.
When muted,
is displayed, and
when unmuted,
is displayed.
When “iPod” is selected as the source,
tapping the key switches between play-
back and pause.
When “Radio” is selected as the
source, tapping the key moves to the
next or previous preset channel.
When “iPod” is selected as the source,
tapping the key moves to the next or
previous track.
p When you turn the ignition switch off (ACC
OFF) and then turn it on again (ACC ON),
these settings will be reset.
Switching to the Advanced
App Mode
WARNING
Certain uses of a smartphone may not be
legal while driving in your jurisdiction, so
you must be aware of and obey any such re-
strictions.
If in doubt as to a particular function, only
perform it while the car is parked.
No feature should be used unless it is safe to
do so under the driving conditions you are
experiencing.
p To use this function, you need to install
AppRadio app in your iPhone.
1 Unlock your iPhone and then connect
the iPhone to this product.
The launch application message is displayed.
AppRadio app launches and the Application
menu screen appears.
p Depending on the status of the connected
iPhone, AppRadio app may fail to launch.
If this happens, follow the launch applica-
tion message to launch AppRadio app.
p If you connect your iPhone while an
Advanced App Mode-compatible applica-
tion is already running, the application op-
eration screen appears on the AppRadio
display.
2 Tap the desired application icon on the
Application menu screen.
The desired application operation screen is
displayed, enabling you to operate the applica-
tion.
En
10
Chapter
03
Basic operation