Filter
Top Products
The following two functions are available. The
rear view camera feature requires a separately
sold rear view camera (e.g. ND-BC5). (For de-
tails, consult your dealer.)
Rear view camera
This product features a function that automati-
cally switches to the full-screen image of the
rear view camera installed on your vehicle.
When the shift lever is in the REVERSE (R) po-
sition, the screen automatically switches to
full-screen rear view camera image.
Camera for Rear view mode
Rear view can be displayed at all times (e.g.
when monitoring an attached trailer, etc.).
Please be aware that with this setting, camera
image is not resized to fit, and that a portion of
what is seen by the camera is not viewable.
CAUTION
Check to make sure settings for rear view camera
displays a mirror reversed image.
p Immediately verify whether the display
changes to a rear view camera image when
the shift lever is moved to REVERSE (R)
from another position.
p When the screen changes to full-screen
rear view camera image during normal
driving, switch to the opposite setting in
“Rear Camera”.
1 Press the Home button to display the
Home screen.
2Tap
on the Home screen.
3 Tap [General].
4Tap
.
5 Tap [Rear Camera].
You can select the following polarity:
! OFF (default):
Select when the rear view camera is not
connected.
! Normal:
Displays the rear view camera image with-
out change.
Select “Normal” in the following case:
! When the rear view camera is con-
nected to display a mirror reversed
image.
! When the polarity of the connected lead
is positive while the shift lever is in the
REVERSE (R) position.
! Normal(GND):
Displays the rear view camera image with-
out change.
Select “Normal(GND)” in the following
case:
! When the rear view camera is con-
nected to display a mirror reversed
image.
! When the polarity of the connected lead
is negative while the shift lever is in the
REVERSE (R) position.
! Mirror:
Displays the rear view camera image in mir-
ror reverse.
Select “Mirror” in the following case:
! When the rear view camera is con-
nected to display a normal image.
! When the polarity of the connected lead
is positive while the shift lever is in the
REVERSE (R) position.
! Mirror(GND):
Displays the rear view camera image in mir-
ror reverse.
Select “Mirror(GND)” in the following case:
! When the rear view camera is con-
nected to display a normal image.
! When the polarity of the connected lead
is negative while the shift lever is in the
REVERSE (R) position.
En
21
Chapter
08
Setting rear view camera
Setting rear view camera