Pioneer SPH-DA02 Car Stereo System User Manual


 
6Tap or to adjust the level of the
equalizer band.
You can set the level of the equalization band
between 15and 15.
7Tap
or to select the desired Q fac-
tor.
You can select the following Q factors:
Low: 1 1.25 1.5 2
Mid: 0.5 0.75 1.0 1.25
p Q factor cannot be adjusted when you se-
lect High.
p If you tap [Reset], the setting values of equali-
zer curve is returned to the default settings.
Using balance adjustment
You can select a fader/balance setting that
provides an ideal listening environment in all
occupied seats.
1 Display the audio settings screen.
2 Tap [FAD BAL].
3Tap
or to adjust front/rear speaker
balance.
You can set the front/rear speaker balance
from 24to +24.
4Tap
or to adjust left/right speaker
balance.
You can set the left/right speaker balance from
24to +24.
Setting subwoofer gain
1 Display the audio settings screen.
2 Tap [FAD BAL].
3Tap
or to adjust the subwoofer
gain.
You can set the subwoofer gain from 12 to
+12.
Customizing the general
settings
1 Press the Home button to display the
Home screen.
2Tap
on the Home screen.
3 Tap [General].
The general settings screen appears.
4 Tap the item that you want to change
the setting.
Display settings
1 Display the general settings screen.
2Tap
.
Make the following settings.
Rear Camera
You can switch the polarity of the rear view camera.
= For details, refer to Chapter 8.
Screen OFF
You can set the time when the screen is blacked out.
! OFF (default):
The screen does not black out.
! 10 sec:
The screen is blacked out after 10 seconds.
! 20 sec:
The screen is blacked out after 20 seconds.
Dimmer
You can link the brightness of the screen to operation
of the vehicles headlights.
! ON (default):
Dims the screen when the vehicles headlights
are turned on.
! OFF:
The screen is not dimmed even when the vehicles
headlights are turned on.
LCD brightness
You can adjust the brightness of display.
Each time you tap
or increases or decreases the
level. 5 to 1is displayed as the level is increased or
decreased.
En
23
Chapter
09
Customizing preferences
Customizing preferences