Filter
Top Products
5
left unattended for over a minute, the unit will return to the Home
menu. If any of the settings are changed pressing the Mode button
or after one minute elapses, the setting(s) will be saved to preset
6. Preset 6 is a scratchpad where settings are saved temporarily
so that the setting(s) can be tried before saving to one of the 5
presets.
The DCX-730 controller contains the control and provides the menu driven
displays to adjust the digital processing power available within the unit. The user
interface consists of a series of menus shown on the display and arrow buttons to
navigate through the menus and to also set the individual available settings.
These settings can then be saved to individual presets (maximum of 5) by using
the number keys on the right hand side of the controller.
Arrow Buttons
Use the arrow buttons to navigate through the available menus
and to adjust parameters. At the top level the X arrow button will
advance you to the next menu level. Once the desired parameter
is selected, use the W/X buttons to move the cursor over to the
parameter. You can then adjust the value of that parameter with
the S/T arrow buttons.
Recalling Presets
While in the Home menu, if you press any of the numbered buttons
on the right side of the controller the presets stored for that
corresponding number will be loaded. The active preset presently
used is displayed by the number in the square below the Home icon
on the LCD panel. If a 6 is displayed there is no active preset loaded.
When a preset is being loaded the following screen displays.
Loading X
WAIT PLEASE . . .
Home Menu Display
1
Precision Power DCX 730
State of The Art Mobile . . .
Indicates the preset memory location currently used. Use the number keys on the right
side of the DCX-730 to select a Preset memory to be loaded. To store current
parameters to a preset, push the preset button while in any menu other than home.