Filter
Top Products
4826 Sterling Drive, Boulder, CO 80301
PH: 720.406.8946 service@psaudio.com www.psaudio.com
®
Installation and Operating Instructions
Getting Started 16
©2012 PS Audio International Inc. All rights reserved.
Owner’s Reference PowerPlay 8500
There are 4 triggers which can be used to initiate automated IR commands:
Master Power On: Follows the power of the PowerPlay. When the main
power switch is used to turn on PowerPlay the designated IR commands
will be sent. This is also true if power is removed and then reinitiated to
PowerPlay.
Master Power Off: Also follows the power state of PowerPlay. When the
main power switch is used to turn off PowerPlay the designated IR
commands will be sent.
UPS On Battery: When the PowerPack Battery Backup alerts PowerPlay
to a power loss and on battery situation PowerPlay will send the
designated commands.
UPS Critical: When the PowerPack Battery Backup alerts PowerPlay to a
battery critical situation PowerPlay will send the designated commands.
Once an IR command has been stored into your PowerPlay you may
issue the command from anywhere in the world simply by using your web browser.