Filter
Top Products
Page 10 of 18
CAUTION
Always check that your route to a waypoint
is safe before travelling towards it.
?
More information ...
For more information on waypoints refer to:
Chapter 3 - Working with Waypoints of the
C-Series Reference Manual
D6729_2
How do I navigate to a waypoint ...
Place the cursor over
the appropriate waypoint.
... using the cursor?
... using the waypoint list?
Highlight
required
waypoint
GO TO WAYPOINT
Press
WPTS/
MOB
Press
GO TO WAYPOINT
OPTIONS
...
Press
GO TO WAYPOINT
Press
WAYPOINT AT
CURSOR
How do I place a waypoint ...
... at the cursor?
... at the vessel?
... OR
Move cursor to
required position
using trackpad.
WPTS/
MOB
Press
Press
WAYPOINT AT
CURSOR
WPTS/
MOB
Press
WPTS/
MOB
Press x2
Press
What is a waypoint?
A waypoint is a position marked on a chart, radar or fishfinder screen to indicate a site (for fishing, diving
etc), or as a position to go to. You can place a waypoint at the cursor position, your boat's position or at
a specified position (using Lat/Long or Loran TD co-ordinates). Waypoints are represented in chart or
radar applications as an 'X' - this can be changed if required and by a horizontal line labelled WPT in
Fishfinder. The details of each waypoint is stored in a waypoint list which can hold up to 1000 waypoints.
Infrequently used waypoints can be archived to a CompactFlash card or transferred to another NMEA
compatible instrument. Waypoints can be renamed, edited, grouped, or erased, as necessary. To make
full use of waypoint features, ensure your display is receiving heading and position data.
Basic Navigation
Working with Waypoints
Card No. 8
WAYPOINT AT
CURSOR
WAYPOINT AT
VESSEL
WAYPOINT AT
POSITION ...
GO TO WAYPOINT
OPTIONS ...
REVIEW AND EDIT
WAYPOINTS