Filter
Top Products
Page 13 of 18
?
More information....
For more information on setting up and using guard zones refer to:
Chapter 5 - Using the radar of the C-Series Reference Manual
D6732_2
How do I set up a circular guard zone?
Turn to set
inner boundary.
Press to accept.
NOTE: You can also set up a sector guard zone.
OK
Press
TARGET
TRACKING...
Press
MONITOR
IN ZONES...
Press Toggle to ON
ZONE 1
OFF ON
Press
SET UP
ZONE 1
Press
ZONE SHAPE
SET INNER
Press Press
SET OUTER
Turn to set
outer boundary.
Toggle to
required type
SECTOR CIRCLE
1. Select guard zone function:
2. Select guard zone option:
What does a guard zone displayed?
IMPORTANT:
A guard zone will only operate when a whole
zone is displayed on the screen, or is displayed
by offsetting the centre. A guard zone is also
inactive for 10 seconds after it is placed or re-
sized, to avoid inappropriate alarms.
Sector Zone
SHM
Circular Zone
SHM
How can the radar help me avoid a collision?
You can set up your C-Series Display to sound an alarm when anything comes within a pre-set range of
the boat. This will allow you to take any necessary action to avoid a collision.
Guard zones
A sector or circular zone fixed with respect to the Ships Heading Marker (SHM). As the SHM moves or if
the centre is offset, or the range scale changes the zone moves accordingly.
MARPA
This function is used to track and analyse the risk of collision of up to ten individual targets.
What is around me?
Using the radar....
Card No. 11
VRM/EBL
TARGET
TRACKING
GAIN TARGETS PRESENTATION