Raymarine RL80CRC PLUS Car Video System User Manual


 
Chapter 8: Installation 8-13
Display Unit
Connection
Display Unit Connection
The rear of the
hsb
2
series LCD display provides the following connection
sockets:
Scanner (antenna) connection
hsb
2
, in/out connector for connecting to another
hsb
2
or HSB series display.
SeaTalk, for SeaTalk data input and output and connecting to another
hsb
2
series display (such as a chartplotteror second radar display).
NMEA Output, for NMEA data output in an integrated system.
Power/NMEA Input, for 12 V, 24 V or 32 V DC power connection, two
NMEA 0183 inputs and one RF ground (screen) connection.
Figure 8-6: Radar Display Connector Panel
The following sections detail the display unit connectors used when installing
a single
hsb
2
series LCD Display. The remaining connector details are
provided in Section 8.8.
NMEA
OUT
POWER/NMEA
TRANSDUCER
SeaTalk
HSB
R
G
Y
To NMEA instruments
NMEA IN 2
D5576-1
POWER IN
NMEA IN 1
To other hsb
2
displays
To SeaTalk
instruments/GPS
To radar scanner unit