12
OPERATION – BASIC
• SCROLL ON [SCROLL OFF] —Titles scroll across panel screen. Scroll Off prevents scrolling.
• AUX1 IN 0 [+6,–6] — Allows you to boost the input volume of a weak external audio source or
diminish a powerful one. Useful for external sources:MP3 players, video games,VCPs, etc.
• VDSEL ON [VDSEL OFF] —This is for the low voltage detction.While "ON",if the power voltage
to the unit drops below approximately 10 volts, the unit will begin "beeping".Turning this "OFF" will
bypass the low voltage detection.
CLOCK OPERATION
Setting the Clock Hours
1. Press and hold the DISP button for 1 second until the hour flashes.
2. Press UP or DN {Down} button to set the hour.
Setting the Clock Minutes
1. Press and the DISP button a second time and the minutes will flash.
2. Press UP or DN {Down} button to set the minutes.
Your settings will be saved after the clock has flashed for 5 seconds.
NOTE:When the radio is off (sleep mode) the clock will be displayed.
MODE SELECTION
Press the MODE button repeatedly to cycle through the following modes:
• CDP PLAY — Enables CDPlayer if a CDis inserted.
• AUX1 — Allows for an external audio source to attach to the sound system.
• TUNER — Enables the Tuner.
MUTE
1. Press the MUTE button to dampen the volume.
2. Press the MUTE button a second time to revert the audio to the previous
level.
NOTE:The panel will display MUTE until the function is canceled.
PUNCH
The Punch button enables the bass and treble response of the audio output to be
boosted for all listening levels.
1. Press the PUNCH button to enable the Punch feature.
2. Press the PUNCH button again to disable.
NOTE:The panel will display "Punch" when the Punch feature is on.
PANEL DISPLAY
Tuner Mode:
The panel will display the band, FM1, FM2 or AM1, and the station frequency, unless the default has been
changed to TITLE DEFAULT and a station title has been programmed in.