16
OPERATION – CD PLAYER
To Repeat a Track
1. Press the 2/RPT button to to repeat the track currently playing..
2. To cancel, press the 2/RPT button a second time.Pressing the 1/SCAN or
3/RDM button will also cancel repeat, or pressing and holding the UP or DN
{Down} Button ( or ).
NOTE:The panel will display RPT until the function is cancelled.
Forward/Reverse
Press the DN {Down} Button ( ) and the player will take you to the start of the
same track as long as that track is more than 10 seconds in.If the track is less than 10
seconds in, pressing the DN {Down} Button ( ) will take the player to the beginning
of the previous track. Pressing the UP Button ( ) takes you to the next track.
Fast Forward/Reverse
1. Press and hold the UP Button ( ) to fast forward the track.
2. Press and hold the DN {Down} Button ( ) to fast rewind the track.
NOTE:The panel will display the elapsed time as long as the UP or DN {Down}
Button ( or ) is pressed.
Track Scan
Track Scan plays the intro to each track for 10 seconds before moving to
the next track on the currently playing disc.
1. Press the 1/SCAN button to begin track scan mode.
2. To cancel, press the 1/SCAN (button a second time.
NOTE:The panel will display 1/SCAN, the CD track number and elapsed time for
10 seconds for each track until the function is cancelled.
Pause CD
1. Press the MUTE button to pause the CD.
2. Press the MUTE button a second time to resume playing the disc.
NOTE:The panel will display PAUSE and the track number until the function is
canceled.
Direct Track Access
Direct Track Access allows any track to be immediately selected and played.This
method is faster than manually cycling through each track on the disc.
1. Press the T-ACC button to select Direct Track Access mode.
2. Press the number, 1-2-3-4-5-6-7-8-9-0, to access the desired track on the disc.
EXAMPLE: Pressing the T-ACC button, then 01 takes you to track 1, pressing 12
takes you to track 12 and so forth. Pressing just 1 digit, 7, will take you
to track 7 after 5 seconds.
MODE BAND
ENT
Remote