Silvercrest KH 2380 Car Stereo System User Manual


 
13 GB/IE
cable for 12 V DC ignition current of the vehicle.
In this manner the car radio and an electric
aerial can only use current from the vehicle
when the ignition is switched on.
Connect the cable for the vehicle’s minus/
ground connection plug-in
fpwith the help of
a biscuit connector with the car’s connection
cable for the minus pole (battery’s minus pole
which by standard is connected with the car’s
chassis).
L
Connection with CD Changer
Tip! Use a connecting cable with DIN 8-pole plug.
A standard CD changer with DIN 8-pole connector
can be connected to the device.
Install the connecting cable with the DIN 8-pole
plug in accordance with its operation manual
in the car.
Guide the connecting cable with the DIN 8-pole
plug to the CD changer and carefully out of the
front of the DIN assembly bracket.
Insert the DIN 8-pole plug of the connecting cable
until it catches into the DIN 8-pole plug jack
AUX
fqto the rear of the casing.
Insert the DIN 8-pole plug to the other end of the
connecting cable until it catches into the DIN
8-pole plug-jack AUX of the CD changer.
L
Connection of an amplifier
Tip!
Use two cinch connection cables
(insula
tion and plug: white / red).
One amplifier per speaker output channel can be
connected to the device.
Install the two cinch connection cables in the
vehicle according to their operating instructions.
Pass two cinch connection cables to the
amplifier and carefully out of the front of the DIN
assembly bracket.
Insert the red plug of the first cinch connection
cable as far as it will go into the OUT / REAR
cinch R plug jack (amplifier connection
[red
/ rear right])
fu.
Then insert the two red plugs of the first cinch
connection cable as far as it will go into the
REAR cinch R plug jack (amplifier connection
[red
/ rear right]) of the amplifier.
Insert the white plug of the first cinch
connection cable as far as it will go into the
OUT
/ REAR cinch L plug jack (amplifier
connection [white / rear left])
gl.
Then insert the second white plug of the first
cinch connection cable as far as it will go into
the REAR cinch L plug jack (amplifier
connection [white
/ rear left]) of the amplifier.
I nsert the red plug of the second cinch
connection cable as far as it will go into the
OUT
/ FRONT cinch plug jack (amplifier
connection [red / front right])
gm.
Then insert the second red plug of the second
cinch connection cable as far as it will go into
the FRONT cinch plug jack (amplifier
connection [red
/ front right]) of the amplifier.
Insert the white plug of the second cinch
connection cable as far as it will go into the
OUT
/ FRONT cinch plug jack (amplifier
connection [white / front left])
gn.
Then insert the second white plug of the
second cinch connection cable as far as it will
go into the FRONT cinch plug jack (amplifier
connection [white
/ front left]) of the amplifier.
L
Connecting a portable audio device
For establishing a cinch connection to any audio
source the headphone output (3.5 mm stereo jack)
of any audio device (e.g. MP3 player) can be
connected to the car radio.
Use a 3.
5 mm jack plug connection cable to 2x
cinch plugs.
Guide the cinch connection cable to the portable
audio device and carefully out of the front of
the DIN assembly bracket.
Insert the red plug of the cinch connection
cable as far as it will go into the LINE IN R
Installation
KH2380_Content_UK.indd 13 12.09.2006 11:57:12 Uhr