Silvercrest KH 2380 Car Stereo System User Manual


 
16 GB/IE
EON: (ON / OFF): EON function on or off.
Turn the “SEL / VOL” control knob
cp until the
display
3reads [EON ON]; the EON function
is now activated.
Turn the “SEL / VOL” control knob
cp until the
display
3reads [EON OFF]; the EON function is
now deactivated.
DSP: (NONE
/ CLAS / ROCK / POP / FLAT):
Selection of an acoustic pattern for various
playback styles of music and language with
preset bass and treble levels.
Turn the “SEL / VOL” control knob
cp until
[NONE] appears in the display window
3. The
acoustic pattern of your setting for [BAS] and
[TRE] is selected.
Turn the “SEL / VOL” control knob
cp until
[CLAS] appears in the display window
3; the
acoustic pattern for classical music is selected.
Turn the “SEL / VOL” control knob
cp until
[ROCK] appears in the display window
3; the
acoustic pattern for rock music is selected.
Turn the “SEL / VOL” control knob
cp until
[POP] appears in the display window
3; the
acoustic pattern for pop music is selected.
Turn the “SEL / VOL” control knob
cp until
[FLAT] appears in the display window
3; the
acoustic pattern for speech is selected.
Your settings are automatically stored.
The device automatically changes back to playback
mode after five seconds.
L
Adjusting volume
Increase the volume by turning the “SEL / VOL”
control knob
cpclockwise.
Reduce the volume by turning the “SEL / VOL”
control knob
cpcounter clockwise.
Mute Function
The mute function enables you to turn off the
loudspeakers.
Press the
MU
button cl. Playback is muted
and [MUTE] appears in the display window
3.
Press the
MU
button cl again. Playback
continues as before the MUTE function was
activated and [MUTE] disappears from the
display window
3.
Loudness Function
The loudness function increases the playback level
of the bass sounds when the volume is low.
Press the
LD / MD
button buand keep it held
down for approximately 2 seconds. The loudness
function is activated, [LOUD ON] appears in
the display window
7followed by [LOUD].
Turn the “SEL / VOL” control knob
coagain.
[LOUD OFF] appears in the display window.
Press the
LD / MD
button buagain and keep
it held down for approximately 2 seconds. The
loudness function is deactivated, [LOUD OFF]
appears in the display window
3 followed by
[LOUD].
L
Setting the 3-Band PLL Tuner
Press the
LD / MD
button buuntil TUNER appears
in the display window
3.
You can select 3 x FM frequency bands (FM1, FM2
and FM3), 2 x medium wave frequency bands (MW1
and MW2) and 1 x long wave frequency band. Each
frequency band has six presets on which you can
store radio stations.
Press the
BD / ENT
button bsand select the
frequency band you wish to receive. In the display
window
3 you will now see the designation of
the frequency band (e.g. [FM2]), the frequency
(e.g. [99.20]) of a radio station that is being
received or the programme ID during stereo
reception and [TP] for traffic information.
Automatic Station Search
Start the station search at lower frequencies
by briefly pressing the
9
button 6. The
tuner automatically plays back the next radio
station that it receives and shows the
information in the display window
3.
Start the station search at higher frequencies
by briefly pressing the
:
button 5. The
tuner automatically plays back the next radio
station that it receives.
Operation
KH2380_Content_UK.indd 16 12.09.2006 11:57:13 Uhr