Filter
Top Products
– 16 –
MECHANISM SECTION (MDM-5A)
3
four step screws
(BVTTWH M3)
4
Remove the mechanism deck
(MDM-5A) to direction of the arrow.
1
connector
(CN401)
2
wire (flat type) (21 core) (MAIN-BD)
(CN402)
2
wire (flat type) (23 core)
(CN400)
SLIDER (CAM)
1
two screws (P2.6x6)
2
bracket (Guide L)
3
leaf spring
5
bracket (Guide R)
6
slider (Cam)
4
two screws (P2.6x6)
Set the shaft of Lever (O/C) to
be at the position in the figure.
Set the shaft of Cam gear to
be at the position in the figure.
• Note for Installation of Slider A (Cam)