Filter
Top Products
17
DISC
OFF
OFF
During Playback
To Operation
Stop Press x*
1
Pause Press X*
2
Resume playback after pause Press X or N
Go to the next chapter, Press >
track, or scene in
continuous play mode
Go back to the preceding Press .
chapter, track, or scene
continuous play mode
Fast forward Press M*
3
Fast rewind Press m*
3
Stop playback and remove the Press Z
disc
*
1
If the resume playback function is activated, you can resume
playback later by pressing N. For details, see “Resuming
playback.”
*
2
DVD/Video CD
Both the picture and sound stop during pause.
Audio CD
The sound stops and the elapsed time flashes on the screen.
*
3
DVD/Video CD
— Each time you press M or m, the playback speed
switches in steps of 2-, 4-, 8-, 16-, and 32 times. The steps
of speed are rough estimates.
— To decrease the playback speed:
press m during fast forward playback.
press M during fast rewind playback.
— To resume normal playback:
press N.
— During fast forwarding (M) and fast rewinding (m),
the sound stops.
Audio CD
— To resume normal playback:
press N.
— During fast forwarding (M) and fast rewinding (m),
the sound stops.
CAUTION
If signal interference occurs during playback, change the
modulated RF signal of your car stereo. See “Changing the
transmitting frequency” (page 13) and follow the steps.
Resuming Playback
1 During playback, press x to stop.
The unit memorizes the point where you stopped
playback.
• DVD/Video CD
“x” flashes and “Resume---” is displayed on the
screen.
• Audio CD
The elapsed time of the Audio CD is displayed.*
* See “Display Screen (Audio CD)” (page 18).
Notes
• If you press x twice, the resume playback is deactivated.
• If you eject the magazine and insert it again, the resume
playback is deactivated.
2 Press N to resume playback.
When the resume playback is activated, playback is
resumed from the point you stopped playback. When
the resume playback is deactivated, playback starts
from the beginning.
Turning off this unit
Press OFF*
1
on the wired remote commander.
*
1
You cannot turn off the power with the wireless remote
commander.
Note
If you press OFF, and then press B/X*
2
on the wired remote
commander, playback starts from the point you pressed OFF
(Resuming Playback is activated). When the resume playback is
deactivated, playback starts from the beginning.
*
2
You can also press PLAY on the wireless remote commander
for start-up.
PREV NEXT
SET UP PAUSE
LIST
DISC
SCAN
PLAY
STOP
ENTER
DISC
SCANm/M
PREV.
STOPx
PLAYN
NEXT>
PAUSEX