Filter
Top Products
15
CDX-M800
cam (L
)
arm (A-L) assy
arm (B-L) assy
C
A
B
3
type-E stop ring 1.5
hole (large)
line
SECTION 3
PHASE ALIGNMENT
3-1. ARM (A-L) ASSY, ARM (B-L) ASSY
3-2. CAM (L)
1 Move the arm (B-L) assy in the direction of the
arrow A and the arm (A-L) assy in the direction of
the arrow B fully (full open state).
2 Align the hole (large) on the cam (L) with part C and
install the cam.
4 Tu rn the cam (L) clockwise and counterclockwise to
verify that both the arms are operated.
4
type-E stop ring 1.5
2
type-E stop ring 1.5
1
arm (B-L) ass
y
3
arm (A-L) assy
bracket (L) assy