17
CDX-M800
3-6. CAM (R)
3-5. ARM (A-R) ASSY, ARM (B-R) ASSY
1 Move the arm (B-R) assy in the direction of the
arrow A and the arm (A-R) assy in the direction of
the arrow B fully (full open state).
2 Align the hole (large) on the cam (R) with part C and
install the cam.
4 Tu rn the cam (R) clockwise and counterclockwise to
verify that both the arms are operated.
bracket (R) ass
y
3
arm (A-R) assy
4
type-E stop ring 1.5
2
type-E stop ring 1.5
1
arm (B-R) assy
3
type-E stop ring 1.5
5
oil damper
6
screw (P 2x4)
cam (R)
B
A
C
arm (B-R) assy
hole (large)
line
arm (A-R) assy