Filter
Top Products
6
3 Firmly connect the system cable adapter
to the tape control jack on the
DHC-MD373/595.
B
A
Insert the connector
firmly all the way.
TC-TX595
DHC-MD373
Note
The system cable adapter is used to connect the AU
BUS connecting cable for exchanging signals
between the tape deck and the DHC-MD373/595. If
you do not connect the system cable adapter and the
AU BUS connecting cable firmly, the tape deck and
DHC-MD373/595 may not operate correctly.
Connection to the DHC-
MD313/333
4 Firmly connect the AU BUS connecting
cable to the AU BUS jack on the
DHC-MD313/333.
B
A
B
A
TC-TX595
DHC-MD333
Insert the connector
firmly all the way.
Note
The AU BUS connecting cable is used for exchanging
signals between the tape deck and the DHC-MD313/
333. If you do not connect the cable firmly, the tape
deck and DHC-MD313/333 may not operate
correctly.
Hooking up the system
(continued)