Filter
Top Products
TANDBERG Content Server User Manual
4
4. Insert the Content Server into a 19” rack, and secure with screws in the front (four
screws).
2.2 Connecting cables
LAN cable
Connect a LAN cable from the ‘LAN 1’ connector on the Content Server to your network. The
LAN 2, 3 and 4’ connectors are not used and should be left open.
Power cable
Connect the system power cable to an electrical distribution socket. Press the power switch
button at the back side to ‘1’ to turn on the Content Server. On the front panel of the system the
power indicator LED, marked ‘Pwr’, will light up.